oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-if75.0m-11a 75.0 mhz if saw filter 11.65 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-if75.0m-11a january 2011 rev a 75.0 mhz if saw filter 11.65 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1=68nh, c1=20pf output l2=68nh, c2=20pf source/load impedance 50 ?
oscilent part number 821-if75.0m-11a january 2011 rev a 75.0 mhz if saw filter 11.65 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c 0 - 60 storage temperature range c -20 - 70 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 75.00 - insertion loss at fo db - 20.5 23.5 group delay variation (fo5.5mhz) ns - 42 100 absolute delay us - 2.40 - temperature coefficient ppm/ c - -72 - passband ripple (fo5.5mhz) db - 0.56 1.00 bandwidth at -1db mhz 11.00 11.65 - bandwidth at -30db mhz - 13.13 - bandwidth at -45db mhz - 13.40 15.00 ultimate rejection db - 55 - relative attenuation fo6.5mhz /fo7.5mhz db 24 / 55
oscilent part number 821-if75.0m-11a january 2011 rev a 75.0 mhz if saw filter 11.65 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?30.0 db bandwidth at ?45.0 db relative attenuation fo6.5mhz /fo7.5mhz
oscilent part number 821-if75.0m-11a january 2011 rev a 75.0 mhz if saw filter 11.65 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo5.5mhz group delay variation fo5.5mhz smith chart
oscilent part number 821-if75.0m-11a january 2011 rev a 75.0 mhz if saw filter 11.65 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
